Our Microflex flat cable technology, designed to meet MIL-DTL-55302F standards, features a flat polyester harness with a screw fixing for high-vibration environments. The Microflex cable harness jumper mates with a CMM 220 connector for high mechanical resistance,...

Our DMM Micro-D Mix connectors are compatible with MIL-DTL-83513G standards and offer a more flexible choice of arrangements to traditional Micro-D or Sub-D connectors, with more than two million possible configurations. Each connector can mix signal, power and...

Our CMM Micro Connectors have been designed to meet or exceed the electrical and mechanical performance criteria of MIL-DTL-55302F and BS-9525-F0033 standards. Three kinds of 2mm contact – high power, high frequency and low frequency – can be combined in up to three...

Our OMM circular micro connectors are designed for board-to-cable interconnection in restricted-space applications such as unmanned vehicles, with a compact modular design featuring up to eight contacts that results in up to 50% weight and space saving compared to our...

As the unmanned industry develops and changes, you need new products that meet specific requirements and constraints. Our Custom Solutions department offers the services and interconnect solutions you require, such as the retrofit of obsolete products, standard...

    The multiplication of data in electronic systems could have disastrous results if the impact of the cross talk was not anticipated. Under an electromagnetic perturbation (EMI, RFI or EMP), the cable’s conductor acts as antennas and picks up the radiated...

Know About Nicomatic: Full in-house manufacturing & design results in high quality products and short term deliveries. 98% on time deliveries Innovative spirit & high degree of speciality with a dedicated product portofolio in connectors & man-machine...

FFC cables are made with conductive copper laminated between 2 layers of polyester, with thermic adhesive increasing life expectancy. From 0.5 to 2.54 mm pitch, Nicomatic offers a wide range of cables for board to board environment. FFC are soldered directly or mated...

Nicomatic crimping presses are dedicated to the manual & pneumatic crimping of male and female contacts in a 1.27mm or 2.54mm pitch. All Nicomatic CrimpFlex™ presses are guaranteed 2 year for parts and labour except for transport and wear parts. With more than 650...

CrimpfFlex™ contacts ensure excellent mechanical retention and electrical contact by piercing the conductor in 6 points. It is the basis for the Nicomatic patent. The contacts are available in 2 standard pitch sizes, 1.27mm & 2.54mm, in male, male soldertab and...

Nicomatic interconnect solution from discrete wire to flat cable is based on a FFC crimped with contacts mounted in a housing in a pitch of 2.54mm on one side and a round wire (AWG 28-22) mounted in a housing on the other. Both are connected together and allow an easy...

Nicomatic offers FFC cables with an Aluminium shield that provides protection against EMI/RFI. These cables are available in all pitches from 0.5 mm and higher, in almost any length and number of conductors. While Nicomatic recommends a shield that is grounded 360...

PCB connectors from Nicomatic are declined into different product ranges that correspond to market standards HE13/14. The plastics used are filled with fibreglass and are UL94-V0. Our PCB connectors in a pitch of 1.27mm and 2.54mm are fully compatible with CrimpFlex™...

Our CrimpFlex™ housings are made of thermoplastic filled with fibreglass classified UL94V-0. They are separated into two product ranges in 1.27mm & 2.54mm pitch and are dedicated to a use with Nicomatic contacts. They are also compatible with our headers and most...

Nicomatic made connectors, whether standard or specific, are found inside many civil avionics projects worldwide for example in electronics regulation calculators: FADEC - Full Authority Digital Electronic Control - systems. FADEC systems have been developed to bring...

The service originally set up in 2010 at Nicomatic was reviewed with the launch of the new website last December 2014. We would like to thank you all for your input & kind remarks that have helped us to bring you an even better, more reliable & faster...

Metal domes arrays are a tactile interface between the user and keyboard. They are made of a pre-cut polyester adhesive and domes (polyester adhesive 0.05mm thick with a 0.03mm thick sheet of acrylic adhesive). Domes arrays are applied to the PCB after peeling off the...

C12000 SMD test terminals are used to test zones on PCBs, separately or by comparison with another. C12000 are designed to attach a large range of probes, test probes, oscilloscope probes at key points... Nicomatic products save time on mounting by avoiding PCB...

Shortly times & outstanding product quality maximize customer satisfaction. Nicomatic have a range of services designed to provide: - time saving - responsiveness - reliable answer Sales & Online Services Short lead-time: 1 week free express services (check...

Nicomatic Light Emitting Diodes ( SMD LEDs) are extremely thin – with a height of 0.5mm or 0.35mm to select from – and in a total size of 3.2 x 1.6 x 0.5mm or 0.35mm (3.2 x 2.5 x 0.5mm or 0.35mm in bi-color). They are an ideal choice for membrane switches as their...

Thanks to the technology and process of 4-legged Switch Air ™ domes patented by Nicomatic (cushion of air between metal domes), domes do not stick to each other any longer. The placement of components on flexible or rigid circuits becomes more reliable in Pick &...

Our round and double radius domes are essentially designed for applications where space and height are critical. Nicomatic offers round & double radius domes that are available with or without micro dimple or multiple dimples. Given their geometry these domes are...