Call us for quote Today at 888-781-2900

Call us for quote Today at 888-781-2900

Call us Today at 888-781-2900

C fans are available in ball bearing and sleeve bearing, wire type and terminal type. Some of these also available with plastic housing and metallic housing, as well as different impeller configurations.to runs on 100~120VAC and 220~240VAC.

Model
Frame Size
Rated Voltage
(VAC)
Airflow *1
(CFM)
Model: RA_8025
Frame Size: 80 x 80 x 25 mm(3.15 x 3.15 x 0.98 in )
Rated Voltage(VAC):115, 230
Airflow *1(CFM):19
Model: RA_8038
Frame Size: 80 x 80 x 38 mm (3.15 x 3.15 x 1.50 in )
Rated Voltage(VAC): 115, 230
Airflow *1(CFM)26 – 29
Model: RA_9238
Frame Size: 92 x 92 x 38 mm (3.62 x 3.62 x 1.50 in )
Rated Voltage(VAC): 115, 230
Airflow *1(CFM) 41 – 46
Model: RA_1225
Frame Size: 120 x 120 x 25 mm ( 4.69 x 4.69 x 0.98 in )
Rated Voltage(VAC): 115, 230
50 – 68
Model: RA_1238
Frame Size: 120 x 120 x 38 mm ( 4.69 x 4.69 x 1.50 in )
Rated Voltage(VAC): 115, 230
Airflow *1(CFM): 91 – 111
Model: RA_1751
Frame Size: 172 x 150 x 51 mm ( 6.77 x 5.91 x 2.00 in )
Rated Voltage(VAC) 115, 230
Airflow *1(CFM) :141 – 180

Call us Today at 888-781-2900

DC fans are Reverse Polarity Protected, available in various sizes ranging from 25x25x10mm to 151x55mm, and furnished in standard ball bearing or sleeve bearing models to run on 5, 12, 24 or 48 VDC. To meet the worldwide safety requirements, they were listed under UL, CUL, CSA, TUV, and CE. Some models also available with VDE.

Many DC fans has Special options like Auto-restarting, Thermal Speed Control, Tachometer Speed Sensor Output, Lock Rotor Alarm Output, Pulse Width Modulation (PWM), Dust proof, and Water Resistant are available on request.

Contact Motion Solutions for more Model Information. Click Here »

Model Frame Size Rated Voltage
(VAC) Airflow *1
(CFM)
RD_2510 25mm sq x 10mm (0.98 x 0.98 x 0.39 in) 5, 12 1.4 – 3.0
RD_3010 30mm sq x 10mm (1.18 x 1.18 x 0.39 in) 5, 12 3.2 – 5.2
RD_4010 40mm sq x 10mm (1.57 x 1.57 x 0.39 in) 5, 12, 24 5.2 – 7.6
RD_4020 40mm sq x 20mm (1.57 x 1.57 x 0.79 in) 5, 12, 24 5.3 – 8.9
RD_4028 40mm sq x 28mm (1.57 x 1.57 x 1.10 in) 5, 12, 24 6.1 – 11.2
RD_5010 50mm sq x 10mm (1.97 x 1.97 x 0,39 in) 5, 12 8.6 – 13.2
RD_6010 60mm sq x 10mm (2.36 x 2.36 x 0.39 in) 5, 12, 24 13.2 – 18.5
RD_6020 60mm sq x 20mm (2.36 x 2.36 x 0.79 in) 12, 24 15.7 – 22.3
RD_6025 60mm sq x 25mm (2.36 x 2.36 x 0.98 in) 12, 24, 48, 60 12.5 – 38.8
RD_7015 70mm sq x 15mm (2.76 x2.76 x 0.59 in) 12,24 31.0-40.0
RD_8010 80mm sq x 10mm (3.15 x 3.15 x 0.39 in) 5,12 20-33
RD_8015 80mm sq x 15mm (3.15 x 3.15 x 0.59 in) 12, 24 22.6 – 34.1
RD_8025 80mm sq x 25mm (3.15 x 3.15 x 0.98 in) 12, 24 26.5 – 56.0
RD_9025 92mm sq x 25mm (3.62 x 3.62 x 0.98 in) 12, 24 39.0 – 54.6
RD_1225 120mm sq x 25mm (4.72 x 4.72 x 0.98 in) 12, 24 72.1 – 99.6
RD_1232 120mm sq x 32mm (4.69 x 4.69 x 1.25 in) 12, 24, 48, 60 93.0 – 156.1
RD_1238 120mm sq x 38mm (4.69 x 4.69 x 1.50 in) 12, 24, 48, 60 80.4 – 154.0
RD_1751 172 x 150 x 51mm (6.77 x 5.91 x 2.0 in.) 12, 24, 48 211.8 – 306.4
RD_1555 172mm dia. x 55mm (6.77 in. dia. x 2.17 in.) 12, 24, 48 209.4 – 301.6

Call us Today at 888-781-2900

Call us for quote today!!! 888-781-2900

Compact size
All in one position, speed and torque control
Panel parameter setting and display
Build in regeneration circuit and dynamic brake
Compact size
All in one position, speed and torque control
Panel parameter setting and display
Build in regeneration circuit and dynamic brake
Item Description
Driver Model SD15/12 SD20 SD30 SD50 SD75
Applicable Motor Rated Current Power Supply AC180V~240V 1φ 50/ 60 Hz AC180V~240V 3 φ50/60Hz
Encoder Type Incremental
Environment Temperature Operation: 0～50°C Storage: -20～80°C
Humidity < 85% RH
Vibration <0.5G
Control Mode Position /Speed / Torque
Position Control Type of Command A, B Phase
CW/CCW
Pulse/Direction
Max. Input Pulse Frequency 500kpps
Electronic Gear Ratio 1/127≦A/B≦127 (A&B:1～10000)
Smoothing time 0～10000ms
In position 0～32767 Pulses
Speed Control Command Input 0～±10V
Internal Speed Command 3 Speeds can be set
Acc/Dec Setting Time 10ms～10000ms/3000rpm
Zero Speed 0～255rpm
Specified Speed Reached Specified by User’s Parameter, 0 ~ Rated Speed
Servo Lock Enable/Disable: may be defined by User’s Parameter
Torque Speed 0～300% Rated Torque
Torque Command Input 0～±10V
Command Smoothing Time 0～10000ms
Speed Limit Analog Command 0～10V
Interned Limit 3 speed can be set
Jog Panel
Alarm Record 10
Over Travel Servo off/Holding
Analog Monitor Signal Speed/Torque
Encoder Output A, B, Z Phase line driver
Encoder Driving Ratio 1/N:N=1～16
Panel 5-digits LED display,4 keys
Others Digital Input ports Servo on, Alarm reset, CW/CCW inhibit, Control mode, External torque limit, Emergency stop, Pulse inhibit
Digital Output ports Servo ready, Alarm, In position, Speed arrived, Zero speed, Encoder Signals.
Communication Ports (RS232C) Status monitoring, parameter setting

Types:

2-Quadrant BLDC Driver With Variable Parameter Settings
2-Quadrant BLDC Driver With Fixed Parameters
HV Series 2-Quadrant BLDC Speed Driver With Parameter Settings

Call us for quote today!!!888-781-2900

M & ND SERIES
-High Current/High Resolution
-Analogue

Resolution set by DIP switches up to 51,200 st/rev*
Current programmable 0.3 to 8.2A*
Advanced bipolar chopper drive
Economic pricing
(* Dependent on drive selected)
M & ND Range Benefits:

Simple and user-friendly
High torque & speed
Very high reliability
Highly efficient
The M & ND Series stepper drives present a range of state-of-the-art, micro stepping drives combining top-of-the-range performance with economic manufacturing methods.

Utilizing an advanced bipolar, constant current chopping technique, the M & ND Series allow greater speed and power to be obtained from the same motor compared with traditional technologies such as L/R drives.
Patented current control technology allows coil currents to be accurately controlled, resulting in drastically reduced current ripple and motor heating.

These drives allow all 3X stepper motors from our smallest 20mm motor to our largest 86mm to be fully exploited in your application.

Drive manuals are available separately on request.

Part No. Output Current Supply Voltage Micro step
Resolution Suitable Motor Type Weight Size Control Signals
A V Kg mm*mm*mm
M542 1.0-4.2 DC(20-50) 2-128, 5-125 28-35-39-42-57-60 0.28 118*75.5*34 pul/dir, cw/ccw single ended, differential
M752 1.8-5.2 DC(20-50) 2-256, 5-200 28-35-39-42-57-60 0.28 119*75.5*34 pul/dir, cw/ccw single ended, differential
ND556 0.5-5.6 DC(18-50) 2-128, 5-125 28-35-39-42-57-60-86 0.28 120*75.5*34 pul/dir, cw/ccw single ended, differential
M880A 2.8-7.8 DC(24-80) 2-256, 5-200 39-42-60-86 0.57 151*97*48 pul/dir, cw/ccw single ended, differential
ND1182 0.7-8.2 AC(70-150) 2-128, 5-125 60-86 1.30 200*137*81 pul/dir, cw/ccw single ended, differential
ND2282 0.45-8.2 AC(80-220) 2-50 60-86 2.00 202*167*63 pul/dir, cw/ccw single ended, differential

DM Range Features:

Software configurable using tuning interface
Programmable resolution to 102,400 st/rev
Powerful 32 bit DSP Controller
Anti-resonance circuitry
DM Range Benefits:

Mid-range instability eliminated
70% audible noise reduction
Low speed ripple smoothing
Low motor heating
The high performance DM Series drives result from the use of new, patented 32-bit DSP control technology. This results in such advanced features as super-low stepping motor noise, anti-resonance, low-speed ripple smoothing and low motor heating.

Each DM Series drive calculates it’s own natural system frequency and applies a damping control algorithm for superior anti-resonance and drastically reduced motor noise.

Motor noise can be dramatically reduced by up to 70% of it’s original value.

Call us for quote today!!!! 888-781-2900

Contact us for quote today 888-781-2900

Contact us for quote today 888-781-2900

Models of PM Stepped Motors:

3X DC brushes DC motors are widely used in electro-medical appliances, mobility, automatic doors, liquid dispensers, pump drives, robotics and many more varied agricultural and light industrial applications

Option:

• Enclosed & Ventilated enclosure designs
• Parking brake with or without hand release
• Worm drive gearboxes with ratios 10:1, 12.5:1, 15:1, 25:1, 30:1, 50:1
• Output shaft, length, flange designed to suit specific applications
• Suitable for use with variable speed drives

Pl contact us for quote for Standard DC Motors…

Frame size: 60, 80, 90, 110, 130, 180, 230
Motor code
Drive input voltage: A-220VAC, B-380VAC
Rated torque: x0.1 (040X0.1=4Nm)
Rated speed: x100 (20×100=2000rpm)
Feedback elements: E-2500ppr incremental encoder, R-resolver, H-hall
Key on shaft
Brake
Low/middle/high inertia, brake for option.
Power range: 0.1kw-30kw
Rated torque range: 0.1Nm-95Nm
Feedback: Encoder/Resolver/Hall
Connector: MS connector/Lead wire

• Shaft Extensions: All motors can be supplied with single or double ended shaft, according to per customer’s request. The length of shaft can made as per customer’s request too.
• Encoder option: All motors can be supplied with different revolution encoder according to customer’s request.
• Brake option: All motors can be supplied with brake with or without hand release.
• Cable harness: Cable harness with or without connectors can be supplied according customer’s request.