V Sheild … The next generation of FFC Shielding…

Advantages of V Shield:

• Available in Card Cable & Jumper/Extension Cables
• Highly Flexible & Lightweight
• 1/2 mil Aluminum Coating Applied During FFC Manufacturing Process
• Available in Marketing Standards; 2.54 mm, 1.27 mm, 1.25 mm and 1.00 mm for Card Cable and 2.54 mm or 1.27 mm for Jumper / Extension Cable

Functionalities of V Shield:

• Perfect Shielding Option for Dynamic Flexing Situation
• Higher Flex Life Compared to Traditional Wrap Shielding. Up to 8.5 million flex cycles at a bend diameter of 63.5 mm (2.5 inches).
• 1/2 mil Aluminum Coating, Provides Superior EMI/RFI and ESD Signal Protection

V Shield Technology:

Applied to the top and bottom of the flat flex cable during the manufacturing process,this 1/2 mil aluminum
layer provides superior EMI/RFI and ESD signal protection to your specific design

This lightweight & flexible solution is perfect for dynamic flexing situations and allows for optimal routing of cables with minimal stress on joints in small space situation.

V Shield Jumper Cable:

Our CrimpFlex™ jumper cables are dedicated to connections from board to board in 2 market standard pitches, 1.27mm
and 2.54mm. The best contact resistance together with ahigh mechanical force are a guarantee for a higher reliability and longer life-time of theend product. Both the 1.27 & 2.54 mm Jumper Cables can be internally or externally grounded to any conductor

V Shield Card Cable:

Our North American manufacturedcard cable is available from 1.00 to 2.54 mm pitch. FFCs are soldered directly or
mated with ZIF/LIF standard connectors. Available in any length from 30 to 9999 mm withany number of conductor